-40%
2013 CAT 304E CR MINI TRACK EXCAVATOR WITH STRAIGHT BLADE!
$ 17371.2
- Description
- Size Guide
Description
Sales(903) 778-2000
4435 St Hwy 274
Trinidad Texas 75163
2013 CAT 304E CR MINI TRACK EXCAVATOR WITH STRAIGHT BLADE, 18” PIN ON TOOTH BUCKET, AUTO IDLE, 2 SPEED HST, AND FRONT AUX!
Video
Vehicle Information
Year:
2013
Make:
Caterpillar
Model:
304E CR
Condition:
Used
Options and Standard Features
Basic Information
Year: 2013
Make: Caterpillar
Model: 304E CR
Straight Blade W/ No Float
Auto Idle
Front Aux
2 Speed HST
18” Pin On Tooth Bucket
Gross Power: 41.8 Hp
Operating Weight: 8996.0 Lb
Dig Depth: 123.0 In
Hours: 4092
Serial Number: CAT0304ELTTN01381
Engine
Engine Model: Cat® C2.4
Net Power: 40.2 Hp
Bore: 3.4 In
Stroke: 4.0 In
Displacement: 146.0 In3
Gross Power: 41.8 Hp
Dimensions
Dig Depth: 123.0 In
Vertical Wall: 95.0 In
Maximum Reach At Ground Level: 206.0 In
Maximum Reach: 211.0 In
Maximum Dig Height: 196.0 In
Maximum Dump Clearance: 141.0 In
Boom In Reach: 83.0 In
Tail Swing: 38.0 In
Maximum Blade Height: 16.0 In
Maximum Blade Depth: 19.0 In
Boom Height In Shipping Position: 58.0 In
O/A Shipping Height: 98.0 In
Swing Bearing Height: 22.0 In
O/A Undercarriage Length: 87.0 In
O/A Shipping Length: 190.0 In
Boom Swing Right: 29.0 In
Boom Swing Left: 26.0 In
Track Belt/Shoe Width: 14.0 In
O/A Track Width: 77.0 In
Specifications
Weights*
Operating Weight: 8996.0 Lb
Weight – Canopy, Standard Stick: 8655.0 Lb
Travel System
Travel Speed – High: 3.2 Mph
Travel Speed – Low: 2.1 Mph
Maximum Traction Force – High Speed: 3799.0 Lb
Maximum Traction Force – Low Speed: 6969.0 Lb
Ground Pressure – Canopy: 4.1 Psi
Gradeability (Maximum): 30°
Hydraulic System
Pump Flow At 2,200 Rpm: 26.4 Gal/Min
Operating Pressure – Equipment: 3553.0 Psi
Operating Pressure – Travel: 3553.0 Psi
Operating Pressure – Swing: 3132.0 Psi
Auxiliary Circuit – Primary (186 Bar/2,734 Psi): 18.5 Gal/Min
Auxiliary Circuit – Secondary (174 Bar/2,524 Psi): 6.6 Gal/Min
Digging Force – Stick (Standard): 4856.0 Lb
Digging Force – Stick (Long): 4384.0 Lb
Digging Force – Bucket: 8498.0 Lb
Type: Load Sensing Hydraulics With Variable Displacement Piston Pump
Swing System
Machine Swing Speed: 10.0 Rpm
Boom Swing – Left (Without Stop): 70°
Boom Swing – Left (With Stop): 55°
Boom Swing – Right: 50°
Blade
Width: 76.8 In
Height: 12.8 In
Dig Depth: 18.5 In
Lift Height: 15.7 In
Service Refill Capacities
Cooling System: 1.5 Gal
Engine Oil: 2.5 Gal
Hydraulic Tank: 11.2 Gal
Fuel Tank: 12.2 Gal
Operating Specifications
Stick Length – Standard: 52.0 In
Stick Length – Long: 64.0 In
Machine Overhang: 0.0 In
Undercarriage
Number Of Carrier Rollers: 1
Number Of Track Rollers: 4
Track Roller Type: Center Flange
Contact
Providence Equipment LLC
4435 St Hwy 274
Trinidad Texas 75163
Ask for:
Sales
Office:
(903) 778-2000
_______________________________
Description
2013 CAT 304E CR MINI TRACK EXCAVATOR WITH STRAIGHT BLADE, 18” PIN ON TOOTH BUCKET, AUTO IDLE, 2 SPEED HST, AND FRONT AUX!
CAT 304E CR MINI TRACK EXCAVATOR IS THE ALL-AROUND MACHINE FROM TOUGH CONSTRUCTION TO WORKING AROUND THE HOME, FARM OR RANCH. WITH 6.4 FT WIDTH AND A DIGGING DEPTH OF 10.3 FT YOU CAN FIT AND DIG ALMOST ANYWHERE. THIS MACHINE IS SMALL ENOUGH TO HAUL EASILY WITH A LIGHT TRAILER TO THE NEXT PROJECT YET POWERFUL ENOUGH TO GET THE JOB DONE!
SE HABLA ESPAÑOL!
FINANCING AVAILABLE!
PLEASE CALL US WITH ANY QUESTIONS!
ASK ABOUT OUR REASONABLE SHIPPING RATES!
MACHINE VIDEO UPON REQUEST!
Vehicle Information
Year:
2013
Make:
Caterpillar
Model:
304E CR
Condition:
Used
Providence's Location
Only 55 miles South East of Dallas
Terms
Placing a Bid:
Your bid constitutes a legally binding contract to purchase this vehicle. Please do not bid if you're not seriously interested or financially able to purchase this vehicle.
Please read eBay's User Agreement
Providence Equipment LLC
reserves the right to,
Obtain and verify the registered information of all users who bid on this auction.
Cancel any and all bids at our discretion, or end the auction early if necessary.
Bidders Age:
You must be 18 years of age or older to Bid.
Special eBay Bid Retraction Rules:
Please read eBay's "Retracting a Bid"
If you place a bid before the last 12-hour period of the auction:
You may retract that bid before that last 12-hour period but only for exceptional circumstances. You will not be allowed to retract that bid during the last 12-hour period of the auction.
If you place a bid during the last 12-hour period of the auction:
You will be allowed to retract the bid for exceptional circumstances but only if you do so within one hour after placing the bid.
Funds & Financing:
For help in arranging for a Pre-Approved loan or for any questions please
e-mail [email protected] or phone Sales at
(903) 778-2000 prior to bidding.
Buyers Inspection: Providence Equipment LLC
has done our best to disclose all information known about this vehicle for auction.
Providence Equipment LLC
welcomes a buyers inspection. If you plan to have a buyers inspection, please make sure you inspect the vehicle prior to the auction ending. Inspection fees if any are Buyers responsibility.
Representations and Warranties made by seller:
This vehicle is being sold "as is". Manufacturer's warranties may still apply. Extended warranty may be available,
e-mail [email protected] or phone Sales at (903) 778-2000 for details. No representations or warranties are made by seller, nor are any representations or warranties relied upon by bidders in making bids.
Taxes and Registration fees:
Out of state buyers are responsible for all state, county, city taxes and fees, as well as title service fees in the state that the vehicle will be registered. All taxes and fees must be paid in full in order for vehicle to be titled and registered.
Title Information
: Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. If payment is made by cashier's or personal checks we will hold all titles for 10 days or until funds have cleared.
Shipping & Delivery:
All shipping charges are buyer's responsibility.
Providence Equipment LLC
will help with shipping arrangements but will not be responsible in any way for claims arising from shipping damage!
Licensed Carriers are generally insured for ,000,000.00. We assume no responsibility for damages incurred after the vehicle leaves our showroom. All shipping arrangements are provided by
Providence Equipment LLC
as a courtesy. We are not affiliated with any carrier. Any claims or other communication regarding shipment of vehicles will be between you and the shipper, not with
Providence Equipment LLC
.
The amount of time it takes for delivery is dependent on the carrier, but is generally 7-14 days from the date the vehicle is picked up from our facility until it is delivered to your destination. Verify with the shipper for an Estimate Time of Arrival to be sure.
Finalizing your Purchase:
Providence Equipment LLC will contact the successful high bidder by e-mail after the auction closes.
Successful high bidder MUST communicate with Sales at
Providence Equipment LLC
by
e-mail [email protected] or phone
(903) 778-2000 within 24 hours of the auction ending to make arrangements to complete their transaction. If we cannot confirm your intention to buy or the sale is not completed within 5 days, we reserve the right to relist this vehicle or sell to any other qualified buyer.
In order to secure bid on vehicle, Successful bidder (BUYER) must within 24 hours of bid closing send to Seller a Deposit in the amount of 10% by major credit card, cash in person or bank certified funds. Within 72 hours of bid closing, Buyer must send balance of funds by cash in person or bank certified funds to Seller.
At time of sending initial deposit, Buyer MUST fax copy of their State issued valid Driver License. Furthermore, before said vehicle is released for shipment to Buyer, all other Sale related and title related paperwork must be signed and returned complete to Seller.
Copyright © 2021 Auction123 - All rights reserved. -
Disclaimer
Auction123 (a service and listing/software company) and the Seller has done his/her best to disclose the equipment/condition of this vehicle/purchase. However, Auction123 disclaims any warranty as to the accuracy or to the working condition of the vehicle/equipment listed. The purchaser or prospective purchaser should verify with the Seller the accuracy of all the information listed within this ad.
2013 CAT 304E CR MINI TRACK EXCAVATOR WITH STRAIGHT BLADE, 18” PIN ON TOOTH BUCKET, AUTO IDLE, 2 SPEED HST, AND FRONT AUX! CAT 304E CR MINI TRACK EXCAVATOR IS THE ALL-AROUND MACHINE FROM TOUGH CONSTRUCTION TO WORKING AROUND THE HOME, FARM OR RANCH. WITH 6.4 FT WIDTH AND A DIGGING DEPTH OF 10.3 FT YOU CAN FIT AND DIG ALMOST ANYWHERE. THIS MACHINE IS SMALL ENOUGH TO HAUL EASILY WITH A LIGHT TRAILER TO THE NEXT PROJECT YET POWERFUL ENOUGH TO GET THE JOB DONE! SE HABLA ESPAÑOL! FINANCING AVAILABLE! PLEASE CALL US WITH ANY QUESTIONS! ASK ABOUT OUR REASONABLE SHIPPING RATES! MACHINE VIDEO UPON REQUEST!&
